2012年1月4日 星期三

RTC Post Installation Setup/Configuration

  1. Run Setup Wizardhttps://[fully qualified hostname]:9443/jts/setup
    1. Configure Public URI
    2. Configure Database
      1. Configure Database Vendor and Connection Type
        Database Vendor: iDerby
        Connection Type: JDBC
    3. Enable E-mail Notification
    4. Register Applications

Application InstanceApplication TypeDiscovery URLFunctional User ID /rmRequirements Managementhttps:// hostname:9443/rm/scrrm_user /ccmChange and Configuration Managementhttps:// hostname:9443/ccm/scrccm_user /qmQuality Managementhttps:// hostname:9443/qm/scrqm_user /admin Lifecycle Project Administrationhttps:// hostname:9443/admin/scrlpa_user
  1. Setup User Registry
    Administartor : scm/scmr1scm
  2. Configure Data Warehouse
    data collection jobs User : dm_scm/scmr1scm

RTC Installation

Initial RTC Software Installation
  • In Ubuntu 11, after run ./launchpad.sh, and in browser, the hyperlink is no any reponse to envoke "Install Manager"
  • After read installation guild, that mention that support RedHat Linux, but no Ubuntu. So I decide to re-install redhad as server for RTC.
  • In RedHat Server 6, following problem is encountered.
    Can't run ./launchpad.sh, with error : /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory
    [Solution] http://www-01.ibm.com/support/docview.wss?uid=swg21459143
Cause

Installation Manger is a 32-bit application and requires 32-bit versions of OS system libraries. These libraries are not installed on RHEL 6.0/6.1 x86_64 (64-bit) by default. You must install these 32-bit libraries on your system before you run Installation Manager.
Resolving the problem

The required libraries are available on the Red Hat 6.0/6.1 distribution DVD. To install the required libraries:
  1. Mount the DVD to the system. Insert the DVD into the DVD drive.
  2. Select open a terminal window as a root.
  3. Execute the commands:
    [root@localhost]# mkdir /mnt/cdrom
    [root@localhost]# mount -o ro /dev/cdrom /mnt/cdrom
  4. Create the text file server.repo in the /etc/yum.repos.d directory.
    NOTE: To use gedit, execute the command:
    [root@localhost]# gedit /etc/yum.repos.d/server.repo
    Add the following text to the file:
    [server]
    name=server
    baseurl=file:///mnt/cdrom/Workstation
    enabled=1

    In the example, the mounting point is cdrom and the RHEL distribution is Workstation but could be sever.where baseurl depends on the mounting point and the RHEL distribution.
    1. Execute the command:
      [root@localhost]# yum clean all
    2. Execute the command to import related public keys:
      [root@localhost]# rpm --import /mnt/cdrom/*GPG*
    3. Execute the commands to install the required libraries:
      [root@localhost]# yum install gtk2.i686
      [root@localhost]# yum install libXtst.i686

      During the install you might receive prompts similar to the example. Answer with 'y'
      Example:
      Total download size: 15 M
      Installed size: 47 M
      Is this ok [y/N]: y
      NOTE: The package name extension (.i686) might change in the command depending on the hardware platform that you use. The table lists valid values for the package name extension.
       RHEL 6.0 package names on different platforms

Platform
32-bit
64-bit
x86/x86_64
i686
x86_64
ppc/ppc64
ppc
ppc64
s390/s390x
s390
s390x
  • After can start up the browser, and click the install 'Hyperline' in browser. 'Administrator Privilege' is need. Erorr happened.
    [solution] http://flylib.com/books/en/1.303.1.115/1/
    • If we use 'su root', and change to 'root', there will be another problem, can't find browser, happen.
    • if we use sudo ./launchpad.sh, then ... bla bla said, scm can't use sudo ....
    • So, I use following step by second method in document
      • su -m root
      • visudo
      • edit /etc/sudoers file
        add line : %scm All=(ALL) ALL, and save
    use 'sudo ./launchpad' startup and click to run install manager successfully

2012年1月3日 星期二

IBM RTC Installation

  1.  In Ubuntu 11, after run ./launchpad.sh, and in browser, the hyperlink is no any reponse to envoke "Install Manager"
  2. After read installation guild, that mention that support RedHat Linux, but no Ubuntu. So I decide to re-install redhad as server for RTC.
  3. In RedHat Server 6, following problem is encountered.
    1. Can't run ./launchpad.sh, with error : /lib/ld-linux.so.2: bad ELF interpreter: No such file or directory
      [Solution] http://www-01.ibm.com/support/docview.wss?uid=swg21459143

Cause

Installation Manger is a 32-bit application and requires 32-bit versions of OS system libraries. These libraries are not installed on RHEL 6.0/6.1 x86_64 (64-bit) by default. You must install these 32-bit libraries on your system before you run Installation Manager.

Resolving the problem

The required libraries are available on the Red Hat 6.0/6.1 distribution DVD. To install the required libraries:

1. Mount the DVD to the system. Insert the DVD into the DVD drive.

2. Select open a terminal window as a root.

3. Execute the commands:

[root@localhost]# mkdir /mnt/cdrom
[root@localhost]# mount -o ro /dev/cdrom /mnt/cdrom

4. Create the text file server.repo in the /etc/yum.repos.d directory.

NOTE: To use gedit, execute the command:
[root@localhost]# gedit /etc/yum.repos.d/server.repo

Add the following text to the file:

[server]
name=server
baseurl=file:///mnt/cdrom/Workstation
enabled=1

where baseurl depends on the mounting point and the RHEL distribution.

In the example, the mounting point is cdrom and the RHEL distribution is Workstation but could be sever.

5. Execute the command:

[root@localhost]# yum clean all

6. Execute the command to import related public keys:

[root@localhost]# rpm --import /mnt/cdrom/*GPG*

7. Execute the commands to install the required libraries:

[root@localhost]# yum install gtk2.i686
[root@localhost]# yum install libXtst.i686

During the install you might receive prompts similar to the example. Answer with 'y'.

Example:
Total download size: 15 M
Installed size: 47 M
Is this ok [y/N]: y

NOTE: The package name extension (.i686) might change in the command depending on the hardware platform that you use. The table lists valid values for the package name extension.

RHEL 6.0 package names on different platforms
Platform​
32-bit​
64-bit​
x86/x86_64​
i686​
x86_64​
ppc/ppc64​
ppc​
ppc64​
s390/s390x​
s390​
s390x​


  1. After can start up the browser, and click the install 'Hyperline' in browser. 'Administrator Privilege' is need. Erorr happened.
    [solution] http://flylib.com/books/en/1.303.1.115/1/
    • If we use 'su root', and change to 'root', there will be another problem, can't find browser, happen.
    • if we use sudo ./launchpad.sh, then ... bla bla said, scm can't use sudo ....
    • So, I use following step by second method in document
    1. su -m root
    2. visudo
    3. edit /etc/sudoers file
      add line : %scm All=(ALL) ALL, and save
  2. use 'sudo ./launchpad' startup and click to run intall manager successfully